- 您现在的位置：买卖IC网 > Sheet目录319 > CHIPPROG-G4 (Phyton Inc)PROGRAMMER GANG 4 SOCKET
Programming Automation via DLL
See also: ACI_ExecFunction , ACI_StartFunction , ACI_GetStatus
6.3.11 ACI_File_Params
typedef struct tagACI_File_Params
{
133
UINT
LPCSTR
UINT
UINT
UINT
Size;
FileName;
BufferNumber;
LayerNumber;
Format;
// (in)
// (in)
// (in)
// (in)
// (in)
Size of structure, in bytes
File name
Buffer number
Layer number
File format: see ACI_PLF_... and ACI_PSF_xxx
constants
DWORD
StartAddressLow;
// (in)
Low 32 bits of start address for ACI_FileSave
().
ACI_PLF_BINARY
//
For ACI_FileLoad(): Ignored if Format !=
DWORD
StartAddressHigh;
// (in)
High 32 bits of start address for ACI_FileSave
().
ACI_PLF_BINARY
//
For ACI_FileLoad(): Ignored if Format !=
DWORD
DWORD
DWORD
EndAddressLow;
EndAddressHigh;
OffsetLow;
// (in)
// (in)
// (in)
ACI_FileSave(): Low 32 bits of end address
ACI_FileSave(): High 32 bits of end address
Low 32 bits of address offset for ACI_FileLoad
()
DWORD
OffsetHigh;
// (in)
High 32 bits of address offset for ACI_FileLoad
()
} ACI_File_Params;
FileName
BufferNumber
LayerNumber
Format
StartAddressLow,
StartAddressHigh
EndAddressLow,
EndAddressHigh
OffsetLow,
OffsetHigh
The name of the file to be loaded to the ChipProg buffer.
The ordinal number of the destination buffer. Buffer numbers begins from zero.
The ordinal number of the memory layer in the buffer. Layer numbers begins
from zero.
The loadable file's format. See the description of the ACI_PLF_XXX *
constants in the aciprog.h header file (see below).
1) Being used with the ACI_FileSave function this parameter specifies the first
(start) address in the source memory layer, from which the file will be saved.
2) Being used with the ACI_FileLoad function, but only when it loads a file in
the binary format (Format == ACI_PLF_BINARY), this parameter specifies
the first (start) address of the destination memory layer, in which the file will
be load into. Binary images do not carry any addresses for the file loading.
Being used with the ACI_FileSave
The address offset that shifts the file position in the destination memory layer.
The offset can be negative as well as positive.
? 2010 Phyton, Inc. Microsystems and Development Tools
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
CHUSBWB-2
BATT CHARGER AA/AAA W/2AAA CELLS
CK-S6-SP623-G
BOARD DEV S6 WITH TX
CK-V6-ML628-G
KIT VIRTEX-6 CHAR ML628
CLSD004
LED DRIVER PROGRAMMER W/CABLE
CMC484812
RACK STEEL 12X48X48 GRY
CMCQP3
PANEL INNER 25.59X15" GREY
CML12C32SLK
KIT STUDENT LEARNING 16BIT HCS12
CMR-8040
RACK CABLE MANAGMNT OPEN ASSMBLY
相关代理商/技术参数
CHIPPROG-G41
功能描述:PROGRAMMER GANG 4 SOCKET RoHS:是 类别:编程器，开发系统 >> 独立编程器 系列:- 产品目录绘图:CHIPPROG-G4 标准包装:1 系列:- 类型:成组编程器 适用于相关产品:EEPROM，EPROM，FLASH，MCU，NVRAM，PLD 所含物品:编程器，线缆，CD 产品目录页面:598 (CN2011-ZH PDF) 相关产品:AE-TS56-16I-3-ND - ISP CABLEADAPTER 14-PIN HEADERAE-TS40N-ND - ADAPTER SOCKET 40-TSOP TO 40-DIPAE-TS32N-ND - ADAPTER SOCKET 32-TSOP TO 32-DIPAE-TS28-ND - ADAPTER SOCKET 28-TSOP TO 28-DIPAE-T44-P16-ND - ADAPTER SOCKET 44-QFP TO 40-DIPAE-T44-I51/505-ND - ADAPTER SOCKET 44-QFP TO 40-DIPAE-SS56-16I-ND - ADAPTER SOCKET 56-SSOP TO 40-DIPAE-SP8U-ND - ADAPTER SOCKET 8-SSOP TO 8-DIPAE-SP28U2-ND - ADAPTER SOCKET 28-SSOP TO 28-DIPAE-SP28U1-ND - ADAPTER SOCKET 28-SSOP TO 28-DIP更多...
CHIPPROG-ISP
功能描述:PROGRAMMER IN-SYSTEM UNIVERSAL RoHS:是 类别:编程器，开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
CHIPS CAPACITOR 0.015UF 50V CERAMIC
制造商:AVX Corporation 功能描述:CHIPS CAPACITOR 0.015UF50VCERAMIC*NIC*
CHIPS-IN-DIPS
制造商:未知厂家 制造商全称:未知厂家 功能描述:ASIC
CHIPT1593CSE6327X1SA1
制造商:Infineon Technologies AG 功能描述:RF SILICON MMIC - Gel-pak, waffle pack, wafer, diced wafer on film
CHIPV6
制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:The industrya??s most compact 100 G test solution
CHIS-24
制造商:Mencom 功能描述: